SURPLUS Inventory
What's New
About Us
Tech Tips Archive
Factory Links
Industry Links
Credit Application
Training Schedule
Support
Home Page
|
Tech Tips for thermostats & controllers (Just click on 'Answer:')
Q: Hello, looking for a reset schedule for static pressure. Have Powers 195-0003 receiver controller.Connected to primary port 1 is 0 to 10" w.c. transmitter located at fan discharge, connected to secondary input port 3 is 0 to 3" w.c. transmitter located 2/3 distance downstream of fan unit.System is looking to maintain 1.5" w.c. Any help would be appreciated.
Submitted by: Rocco, Thermotician New York City Agency
Answer:
A: It depends upon what your reset parameters are (what are you reseting based upon?). Determine what your setpoint is going to be; then decide how far to either side of the setpoint you are willing to drive your fans. For example, if your static pressure setpoint is 1.5"WC, are you comfortable driving the pressure up as far as 2-2.5"WC or as low as0.5-1.0"WC. Based upon the physical limitations of the system and the engineers drawings, that needs to be defined. One observation is that your transmitter spans seem to be too disparate. Give us a call to discuss the application (800) 227-9800.
|
Q: how do i wire up vision pro i a q model yth9421c1002 to heatpump&furance
Submitted by: bruce, president james a dupras&sons inc
Answer:
A: Follow this link to the set up instructions: http://customer.honeywell.com/techlit/pdf/PackedLit/69-1816EFS.pdf
|
Q: trane thermostat baysenso19c
what can this be replaced with non programmable
Submitted by: paul, owner great design inc
Answer:
A: Contact your installingor service contractor to ascertain the best replacement based upon your equipment and application.
|
Q: need home owner guide for thermostat number TH8320u/08
Submitted by: alfred ganss jr, home owner n/a
Answer:
A: For help with the installation or set up, please consult a qualified contractor. If you are not sure who to contact, let us know and well provide a referral to a reputable contractor in your area.
|
Q: i need to wire TH6320R1004 andTHM4000R1000
Submitted by: luis pacific plumbing
Answer:
A: We sent you, via email, the installation documents for the mentioned products.
|
Q: I want to keep a large beer freezer just at the right temperature and don't mind paying for the right control
Submitted by: THOMAS JONES
Answer:
A: There are many different approaches to take in trying to maintain temperature for a walk-in box or other closed case refrigerator. Your best bet is to contact a qualified contractor in your area. If need be, well be happy to recommend one. A word of advice,though -- Dont put the beer in the freezer!
|
Q: Need spec sheet on a TK-8124-103-0-1
Submitted by: Dean Kohl, Maintenance spec. adv. Dodge Correctional Inst.
Answer:
A: I sent the technical documentation to you via email. If you have any questions, please call us at 800-227-9800.
|
Q: Would like to find technical specs for a Barber-Colman Step Controller for a comercial electric boiler Part No SP-20-0-0-5
Submitted by: Gerhard Hopland, Service Tech Siemens
Answer:
A: We are sending you technical instructions for BC series SP-12000 Step Controllers. I believe that this is what you are looking for. Let us know if it helps.
|
Q: Iam wondering if you make a remote control for air cond. that is complete remote. I am an officer at a club that rents a hall for partys etc. and we would like to change the thermostat so people can`t tamper with it.
Submitted by: Jack Huether Venice Social Club
Answer:
A: Honeywells Prestige Comfort System may have exactly what you are looking for. Take a look at the brochure posted at this link: http://www.forwardthinking.honeywell.com/related_links/wireless/prestige/sell/50_1078.pdf.
If youd like, we can recommend a reputable HVAC contractor in your area.
|
Q: looking for a thermostat too replace johnson control T210HP-15 with a progranmable model thanks Phil
Submitted by: phil munsch, owmer phils hvac inc
Answer:
A: For a non-programmable Johnson replacement try
T600HPN-2.
|
Q: hI I NEED THE sCAMATICS ON THE WIRERING FOR A THERMOSTATE pRO TH3110d
Submitted by: BEVERLY
Answer:
A: Go to customer.honeywell.com. At the bottom right hand side of the page input the part number you are looking for. You will find all of the pertinent literature.
We sent you the particular document you need via email.
|
Q: I just bought a Honeywell RTH 3100C thermostat. I have a green,white, red and blue wires coming out of the wall. Which wires go to what on the new thermostat?
Submitted by: Doran Myers
Answer:
A: You need to call a qualified contractor. If you need a referral in your area, please contact us. We will be happy to suggest someone for you.
|
Q: Hello, I need a quote for a TS-8111 Barber Coleman thermostat. Can you please email it to me.
Andy Wells
Siemens Building Technology
6 British American Blvd, Suite C
Latham, NY 12110
Submitted by: Andy Wells, Engineeirng Specialist Siemens Building Technology
Answer:
A: Let us know which Siemens branch you work out of. For a price quote, please call us at 800-227-9800 or check through the parts search area of this site. If you are a registered user, your actual price will show.
|
Q: What type of thermosate is used with heat pumps? Are there 2 stage programable availible?
Submitted by: Ron Clasen, retired
Answer:
A: Honeywell has the widest range of residential thermostats avaialble, and still leads the pack in quality and design. Most of their contemporary models have variations that will accommodate the multiple stages and reversing valves utilized in heat pumps; programmable and non-programmable. Contact a qualified contractor to be sure of the parts selection and installation. If youd like, we will suggest one in your area.
|
Q: What would be replacement thermostat fo #T7300F2010 with a Q7300H2029 sub base
Submitted by: Warren Chouinard, Facilities Maint. Seektech
Answer:
A: The replacement of record with Honeywell is their T7351F2010. No additional sub-base required. Depending upon the application there could be more things to consider. Call us at 800-227-9800 to discuss.
|
Q: Ive been looking for a furnace control circet board,could you refer me to someone local.Lubbock Texas
Submitted by: Allen Martinez
Answer:
A: It depends upon whose furnace you are looking at. Your best bet is to contact your installer. If you didnt have it installed, check with the manufacturer for a source in your area.
|
Q: Installed a Honeywell RTH5100B thermostat. My unit worked great for one night, the next day it would not respond to the thermostat. The heat ran continously. What gives?
Submitted by: Darald Jones
Answer:
A: Thanks for your inquiry. Its best to check with a qualified contractor, or with the retailer from which your purchased the stat. Let us know if we can refer to to a qualified contractor in your area.
|
|
|
